ANATEL - fixed-satellite service satellite networks



ANATEL

Please be advised that Resolution No. 676 of April 7, 2017 was included, which came in response to Public Consultation No. 13 of June 13, 2016.

It limits the use of the radio frequency bands from 18.1 GHz to 18.6 GHz and from 27.9 GHz to 28.4 GHz to fixed-satellite service satellite networks and makes other arrangements.

Note:
- This new Resolution resolves:

Article 1 To limit the use of the radio frequency bands from 18.1 GHz to 18.6 GHz and from 27.9 GHz to 28.4 GHz to fixed-satellite service.

Art. 2 To determine the inclusion in the Plan for the Allocation, Destination and Distribution of Frequency Banners in Brazil (PDFF) of Brazilian Note B9, with the following wording:
"B9 - The use of radio frequency bands from 18.1 GHz to 18.6 GHz and from 27.9 GHz to 28.4 GHz is limited to satellite networks of the Fixed Satellite Service."

Art. 3 - To determine that new authorizations for the use of radiofrequency are not issued, new stations are licensed or new radio frequencies consigned in disagreement with what is established in art. 1 st.

Art. 4 To determine that new licenses for the use of radiofrequency are not issued, new stations are licensed or new radio frequencies are assigned in channels 29, 30 and 31 of Table I, channel 15 of Table II and channel 8 of Table III of Standard No. 15 / 96, approved by Ordinance MC No. 1,288, of October 21, 1996.

Article 5 To determine that no new radiofrequency use permits are issued, new stations licensed or new radio frequencies assigned to channels 1 to 4 for 2/4 Mbit / s and channels 1 and 2 for systems up to 8 Mbit / s in Table I Of Standard No. 004/91, approved by Portaria SNC nº 247, of October 21, 1991.

Article 6 To establish that existing stations of telecommunication services associated with terrestrial systems in the radio frequency bands of 27.9 GHz to 28.4 GHz, as well as those operating in the bands and channels mentioned in arts. 4 and 5, may operate on a primary basis up to 2 (two) years from the date of publication of this Resolution, when they will then operate on a secondary basis.

Art. 7 Replace Standard No. 009/93, approved by Administrative Rule No. 1,780, of December 7, 1993.

Source: Anatel website.

Inclusion of the resolution in its entirety, just follow the path:
Site Anatel> Legislation> Resolutions> 2017> Resolution nº 676, of April 7, 2017.

댓글

댓글 쓰기

이 블로그의 인기 게시물

달팽이 키울 때 주의할점 (먹이, 짝짓기) / 물속 담그면 죽음 / 무, 깻잎, 양파, 파, 피망, 오렌지 껍질은 주면 안됨

달팽이 먹이 ① 달팽이는 잡식성이므로 아무거나 잘 먹습니다 .  단 ,  절대로 동물성 먹이를 주면 안됩니다 . ② 어떤 채소나 다 좋아하지만 특히 부드러운 잎이나 단것을 좋아 한답니다 .. 상추 , 오이 , 수박 , 토마토 , 당근 기타 잘게 썰어서 주세요 .. 먹이는 일주일에 두번정두 조금씩만 주시면 되구여 먹이를 어느정도 먹으면 깨끗히 치워주 세요 ③ 먹이를 주는 방법은 채소류는 그냥 주어도 되지만 곡물류 ( 감자 , 옥수수 , 고구마 , 쌀 , 보리 , 밀 ...) 등은 잘게 으깨어서 물로 반죽을 한다음 떡밥처럼 적당한 수분을 함유하게 한다음 넓게 펴서 줍니다 . * 손으로 움켜짰을 때 물방울이 맺히는 정도로 .... ④ 음식물 찌꺼기 등을 말려서 역시 물로 반죽을 하여 떡밥처럼 만들어서 넓게 펴서 줍니다 . ⑤ 가축사료 ( 개 , 닭 , 오리 ... 등 ) 중에서 식물성으로만 된 사료를 반죽하여 줍니다 . ⑥ 달팽이가 성장하기 위해서는 칼슘성분이 반드시 필요합니다 .  달팽이 패각 ( 달팽이집 ) 을 위해서입니다 . 계란껍질 등을 으깨어 먹이랑 같이 반죽해서 줍니다 . -->  달걀껍질을 줄때 먼저 달걀을 삶아서 안의 달걀은 먹으세요 그럼 달걀껍질만 남죠 ? 그 달걀껍질의 안쪽에 보시면 하얀 막 같은 것이 있습니다 . 그걸 손으로 다 벗겨내세요 그리고 믹서기로 갈든가 아니면 손으로 부숴서 가루로 만들어 주세요 그리고 그 가루를 달팽이  원래 먹이 위에다 솔솔 뿌려주세요 그럼 달팽이 껍질이 튼튼해지는데 많은 도움이 됩니다. 키울때 주의할점 ▶달팽이 키우기 ① 어린 달팽이가 수  mm 정도의 크기가 되지만  5 개월 정도면 완전히 성장하는데 성장환경에 따라 가장 크게는 어린아이 주먹 이상 만큼이나 크기도 합니다 ② 달팽이 알이 부화하고 난 후 특히 온도 ,  습도를 잘 유지시켜 주시기 바랍니다 . ③ 달팽이가 완전히 클 때 까지는 조심해서 다루어야 합니다 .  특히
계속 읽기

KCC (Electromagnetic Compatibility EMC Registration)

이미지
KCC (Electromagnetic Compatibility EMC Registration)  Overview Information & communications equipment are subject to mandatory certification according to Article 46 and Article 57 of the Radio Waves Act and Article 33 of the Fundamental Electronic Communications Act. Eligible manufacturers, importers or distributors shall label certified equipment according to Article 3 of Certification Rules for Information & Communication Equipment. With increasing demands in electric or electronic appliances, electromagnetic compatibility registration is intended to protect users or consumers from or to minimize vital or material damages, communicational interference with other items and mechanical misuses. Target devices devices with more than one terminal port which serve to input, output, store, retrieve, transmit or control data & communicating messages, except for wireless items with 600 voltage or lower power supplies, including computers and peripherals, in
계속 읽기

Korea Certificate (Self-Regulatory Safety Confirmation)

이미지
Korea Certificate (Self-Regulatory Safety Confirmation) Overview The voluntary safety check is intended for industrial product manufacturers or importers to commit a designated testing agency to carry out safety testing prior to product distribution or customs clearance , and report the test results to a safety certification agency, to prevent injuries from potential hazards due to their structure, materials or uses. - Industrial product safety management system FAQ - Quality Management & Industrial Products Safety Management Acts - Quality Management & Industrial Products Safety Management Act Enforcement Ordinances - Quality Management & Industrial Products Safety Management Act Enforcement Rules Voluntary safety check reporting and revision charges Notice Qualifying Items (extended) Revised voluntary safety check report 20,000KRW Voluntary safety check report (for other articles) Other agency test results 50,000KRW V
계속 읽기